Cable Fault
Location & Testing Equipments for Low, Medium and High Voltage Networks
Products:
DC HV Test Sets: PGT 25-D1.5
The PGT 25-D1.5
is a cable testing device for VDE-compliant DC voltage testing of cables and
cable systems (for testing the cable insulation of a newly laid cable before
commissioning, in compliance with VDE 0276-620/621).
Thanks to its
compact dimensions and less weight, this device is portable and can be used
directly on site.
The readable
values of output voltage and leakage current make it possible to evaluate
the state of the test object as regards voltage stability and insulation
capacity.
CHARACTERISTICS
|
PGT 25-D1.5 |
|
| Output
voltage |
0 to 25 kV (negative
polarity) |
| Output
current |
1.5 mA |
| Short
circuit current |
1.6 mA |
|
Discharge energy |
3000 J (internal
discharge device) |
| Power
Supply |
230 V ± 10 %, 50 Hz
Internal rechargeable
battery |
Products:
DC HV Test Sets: PGT 50-D6
The PGT DC test
sets comprise an operating and a high voltage component. They are used for
VDE-compliant DC voltage testing of cables and cable systems (for testing
the cable insulation of a newly laid cable before commissioning, in
compliance with VDE 0276-620/621).
Thanks to their
compact dimensions and less weight, these sets are portable and can be used
directly on site.
The readable
values of output voltage and leakage current make it possible to evaluate
the state of the test object as regards voltage stability and insulation
capacity.
CHARACTERISTICS
|
PGT 50-D6 |
|
| Output
voltage |
0 to 50 kV (negative
polarity) |
| Output
current |
6 mA |
| Over
current release |
> 8 mA |
|
Discharge energy |
6 μF (internal
discharge device) |
| Power
Supply |
230 V ± 10 %, 50 Hz |
Products:
DC HV Test Sets: PGT 80-D5
The PGT DC test
sets comprise an operating and a high voltage component. They are used for
VDE-compliant DC voltage testing of cables and cable systems (for testing
the cable insulation of a newly laid cable before commissioning, in
compliance with VDE 0276-620/621).
Thanks to their
compact dimensions and less weight, these sets are portable and can be used
directly on site.
The readable
values of output voltage and leakage current make it possible to evaluate
the state of the test object as regards voltage stability and insulation
capacity.
CHARACTERISTICS
|
PGT 80-D5 |
|
| Output
voltage |
0 to 80 kV (negative
polarity) |
| Output
current |
5 mA |
| Over
current release |
> 7 mA |
|
Discharge energy |
4 μF (internal
discharge device) |
| Power
Supply |
230 V ± 10 %, 50 Hz |
Products:
DC HV Test Sets: PGT 110-D4
The PGT DC test
sets comprise an operating and a high voltage component. They are used for
VDE-compliant DC voltage testing of cables and cable systems (for testing
the cable insulation of a newly laid cable before commissioning, in
compliance with VDE 0276-620/621).
Thanks to their
compact dimensions and less weight, these sets are portable and can be used
directly on site.
The readable
values of output voltage and leakage current make it possible to evaluate
the state of the test object as regards voltage stability and insulation
capacity.
CHARACTERISTICS
|
PGT 110-D4 |
|
| Output
voltage |
0 to 110 kV
(negative polarity) |
| Output
current |
3.5 mA |
| Over
current release |
> 5.5 mA |
|
Discharge energy |
22 μF (internal
discharge device) |
| Power
Supply |
230 V ± 10 %, 50 Hz |
