Cable Fault
Location & Testing Equipments for Low, Medium and High Voltage Networks
Products:
Portable CFL Systems: P3a
Portable advanced cable fault locator 3kV
The P3a is an advanced
mini HV cable fault locator for LV, lighting and control cable & wire
networks.
The
system allows proof testing (HV DC) and pinpointing (Surge) cable faults.
Operation and parameter
setting is controlled electronically for ease of use.
A built-in discharge unit
provides safety for the instrument, the operator and the device under test.
Powerful surge unit producing
fast 4 sec. 450 Joule @ 3kV pulse cycles, the P3a and provides a helpful
tool in reducing fault locating time.
CHARACTERISTICS
|
P3a |
Standard |
Optional |
|
Analysis & test of faults: |
|
|
| DC test
voltage |
3 kV (Proof test) |
|
| |
|
|
|
Mapping of faults: |
|
|
| Max.
Surge voltage |
3 kV |
|
| Max.
Surge energy |
450 J |
|
| Surge
rate pulses |
450J @ 4s to 10s;
single shot |
|
| |
|
|
|
Integrated devices: |
|
|
|
Pre-location ready (HV) |
Integrated 3kV ARTi
High Voltage coupler for using with optional TDR |
|
| Safety |
Built-in Discharge
unit |
|
Optional
Devices for extending the P3a capabilities:
InterFlex
140: The integrated
inductive Arc Reflection Technology (ARTi) module enables the HV
pre-location of high resistant faults in combination with an external TDR
such as the InterFlex 140.
Kamphone:
For precise pinpointing the optionally available electro-acoustic sensor
Kamphone is used for flash-over faults.
Locator S:
The Locator S is used for pinpointing cable sheath faults based on the
step-voltage method.
