Cable Fault
Location & Testing Equipments for Low, Medium and High Voltage Networks
Products:
Portable CFL Systems: P5i
Portable all-in-one fault locating system
5kV
The P5i provides an easy
to use all-in-one solution for troubleshooting, pre-locating and pinpointing
of cable faults in complex LV, lighting and control cable networks.
Menu guided computerized
operation allows to detect and precisely locate most possible faults for
even unexperienced users.
Large color screen; the P5i
can display measurement curves, settings and message codes simultaneously.
Precise DC HV test facility
that measures and displays leakage current over time.
Integrated full scale TDR
capability including the high voltage ARTi mode will isolate and pre-locate
low and high resistance faults with outmost precision.
Consequently, precise
pinpointing will take much less time.
Fast HV surge pulse cycles of
4 sec. with up to 1000 Joule energy provide for even the most demanding
locating jobs.
The multi-dimensional safety
system PROSAFE 3D ensures maximum safety for the instrument, the operator
and DUT.
CHARACTERISTICS
|
P5i |
Standard |
Optional |
|
Analysis & test of faults: |
|
|
| DC test
voltage |
0 to 5 kV |
|
| Sheath
test mode |
0 to 5
kV; 0 to 70 mA |
|
|
Insulation Resistance Measurement Mode |
|
10kΩ to 200MΩ @ 5kV |
| |
|
|
|
Isolation of faults: |
|
|
| TDR
range |
60 km |
|
| TDR
impulse / width |
160 V /
50 ns to 10 µs |
|
| TDR
resolution |
0.2 m |
|
| TDR
impedance matching |
25 to
1600 Ω |
|
|
Pre-location TDR-LV mode |
1-phase
over HV cable |
3-phase over LV
cable |
| |
|
Intermittent Fault
Scanning |
|
Pre-location TDR-HV mode |
ARTi:
4kV (Arc Reflection) |
SCC: 4kV (Surge
Current) |
| |
|
|
| Burn
Module |
70 mA |
1 A |
| |
|
|
|
Mapping of faults: |
|
|
| Max.
Surge voltage |
0 to 4 kV |
|
| Max.
Surge energy |
1000 J |
|
| Surge
rate pulses |
4s to 10s;
single shot |
|
| Sheath
pinpointing |
|
0 to 5 kV |
| |
|
|
|
Integrated devices: |
|
|
| Safety |
Built-in Discharge
unit |
|
| |
Integrated PROSAFE 3D safety system including faulty ground
conditions monitor (FU/EP) |
PROSAFE 5D safety
system that includes separation transformer and extra residual
voltage monitor |
Optional
Devices for extending the P5i capabilities:
Kamphone:
For precise pinpointing the optionally available electro-acoustic sensor
Kamphone is used for flash-over faults.
Locator S:
The Locator S is used for pinpointing cable sheath faults based on the
step-voltage method.
