Electrical Test Equipment For Substation & Protection Relay Testing
Products: Primary
Injection: Raptor HV
High Voltage tester
The Raptor HV, also called the high voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of a moderately high AC voltage.
This
product can work only in combination with a Raptor Master and is
visually similar to it.
The Raptor HV connects to the master unit via the Expansion Port,
from where it also takes the necessary power. You can think of the
Raptor HV as a pluggable high voltage peripheral that takes
advantage of all the valuable features in the Raptor Master
including the electronically controlled switching amplifier, DSP
based intelligence and a robust communication and device
synchronization system. Naturally the HV’s control is fully
integrated in the master’s console.
The voltage signal generated by the master at the expansion port is
raised by the HV up to two user selectable ranges, 1kV and 2kV, and
the output is measured in current, voltage and phase angle to
provide adequate injection control and application’s feedback.
In order to comply to international safety requirements, the Raptor
HV’s package includes an internal buzzer that signalizes the high
voltage output activation and two connectors for an optional
rotating warning lamp and an optional mushroom type emergency
breaker. The internal buzzer can be muted from the Raptor’s console.
CHARACTERISTICS
-
Two user selectable output ranges: 0-1000 VAC and 0-2000 VAC.
-
Powered from the Raptor Master via expansion port.
-
Controlled from the common Raptor Master’s user interface.
-
Integrated test voltage and current measurement.
-
Supported by additional Test Templates.
-
Audible safety buzzer.
-
Detachable rotary warning lamp and Emergency stop button.
-
Outstanding Raptor style portability.
